Turborix RC 1300g 3D Plane 1100kv (rpm/v) D3639 Outrunner BL Brushless Motor
Περιλαμβάνονται τα 6 επίχρυσα βύσματα και τα 6 θερμοσυστελόμενα σωληνάκια.
Specification:
| Model : |
D3639-1100 |
| Airplane Class : |
1300g (3D Plane) |
| KV (rpm/v) : |
1100 |
| Voltage (v) : |
11.1 |
| No Load Current (A): |
4.8 |
| No Load Speed (rpm) : |
12300 |
| Load Current (A) : |
35A/11.1v |
33A/11.1v |
| Load Speed (rpm) : |
8740 |
8000 |
| Recommended ESC : |
Turborix Advance 40A ESC |
| Propeller : |
APC12X7 |
APC13X4 |
| Pull (g) : |
1750 |
1650 |
| Weight : |
168g |
| Gross Weight : |
~255g |
Configure Advise and Usage Limit:
| 1. |
Advise application power 500W |
| 2. |
Momentary power 700W max |
| 3. |
Propose configure for this motor:
- Battery---Battery---1800mAh 20C 3Slipo
- ESC---40A
- propeller--- APC13X4
|
| 4. |
Don't let the exiguous carbon steel metal too close with motor when fixing, it breathe inside motor by magnetic field then cause the motor to set up or cause the winding short! |
| 5. |
Please use stainless steel screws when fixing the motor, and the length of the screw don′t longer than the pedestal, lest to breach the wire! |
| 6. |
Motor temperature should not exceed 90 |
Configuration characteristic:
| 1. |
Magnet---N35SH |
| 2. |
Silicon steel---0.35(mm) |
| 3. |
Bearing---NMB |
| 4. |
Shaft--- Carbon steel |
| 5. |
Guide wind system--- Free cooling |
| 6. |
Insulated material--- Somar Epoxy (Japan) |
Reliability Testing:
| 1. |
Testing Condition
- Voltage---11.1(V)
- Propeller--- APC13X4
- Load current---28(A)
- Net Thrust---1300(g)
- Room temperature---25
- Run mode---5 Minute ON, 2 Minute OFF
- Shaft direction gap--- 0.05-0.2mm
- Noise no load---30db
|
| 2. |
After testing 100 times circle
- Net thrust---1300(g)
- Current---28.5(A)
- Temperature rising---85
- Shaft direction gap--- 0.1-0.2mm
- Run mode---5 Minute ON, 2 Minute OFF
|
HellasSites